Shower Installation Made Simple - A Complete Guide For New Units

Schedule Your Service



Have you been in search of facts about Simple ways to Install a Shower Cubicle on Your Own?


How to Install a Direct-to-Stud Shower Enclosure
A successful shower installment needs cautious preparation and a great deal of work. For the most part, you will certainly need to do 3 types of tasks: mounting wall surfaces, setting up the plumbing, and also finishing walls.

Prep work


Firstly, you must choose the kind of shower that you desire to install. It is essential to identify whether the chosen shower is capable of handling specific systems and also can regulate a risk-free degree of water via the central heating boiler. Most shower systems nowadays are created to be adaptable to different water pressures (such as kept warm water and also cool mains).
It is likewise crucial to think about the water pressure and the planning of the piping as well as water drainage for the shower

Various Types of Shower Units


  • Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be attached to the bathroom faucet as per your requirement, as well as the water temperature level can be changed using the faucets. Push-on mixers are cheap and extremely easy to install. Nevertheless, although the pipe link is basic, it is conveniently displaced. In addition, it is bothersome to readjust the temperature level.

  • Bath/Shower Mixer: The tube and also spray of this sort of shower are incorporated with a bathroom mixer faucet, and also the temperature level can be readjusted via the bathroom faucets. It is a really economical alternative and also no added plumbing is entailed. Nonetheless, the bath/shower mixers additionally experience bothersome temperature level control choices.

  • Handbook Mixer: The pipe as well as spray of a hands-on mixer shower unit are a part of the wall device and also the hot and cold water supplies are connected to a solitary shutoff The temperature level as well as pressure of the water are controlled via either one or a range of knobs (in extra pricey showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are much more expensive than the previously mentioned mixers. They additionally need extra plumbing of hot and cold water supply pipelines.

  • Thermostatic Mixer: The pipe as well as spray of this shower type are a part of the wall surface system as well as the hot and cold water products are attached to a single valve below also. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to avoid it from becoming also warm. One of the largest advantages of a thermostatic mixer shower type consists of practical temperature control. Nonetheless, it is one of the most expensive of the various mixer choices.

  • Power Shower: A power shower is a single device consisting of a powerful electrical pump that is capable of altering both the water stress as well as temperature. This kind of shower can be fitted if there is supply of water from a cold water tank as well as a hot water cyndrical tube. A power shower makes the adjustment of both stress and temperature level simple. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is provided by a combination central heating boiler under mains stress.

  • Electric Shower: An electrical shower is plumbed into a keys cold water supply and it warms the water electrically. It is essential to keep in mind that for this shower type to be mounted, the mains stress needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The device enables the temperature level as well as stress to be changed using a knob. Versions with temperature stabilisers are much better as they remain untouched by other faucets elsewhere being used within the house. A major downside of electric showers is that the control handle only enables the alternative of high temperatures at much less pressure, or lower temperature levels at a greater stress. This is problematic in the winter season when the spray is usually weak as well as the keys water is colder. Nevertheless, this trouble is taken on in some models which are offered with a winter/summer setup.


  • Method


    Depending upon the sort of shower you wish to set up, the shower head need to either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it should have a check valve.
    Before beginning, it is suggested to mark the settings of the shower head and also control, and to plan the pipe-work included. In addition, the drainage system to eliminate the drainage will certainly require to be planned. Both settings of the wire route as well as the shower button will likewise require to be considered if an immediate or electrical shower unit is being installed.
    Use the direction overview provided with the shower system to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is very important to remove the water supply. In order to secure the pipelines, they ought to be offered a waterproof covering and likewise fitted with separating shutoffs. The pipes can then be hidden right into the wall surface and plastered over to neaten the general appearance.
    Fit the base tray, shower head, and also fittings.
    Connect the primary shower control to the pipelines that will certainly be providing the water (This may require a female screw thread adapter).
    Reconnect the water system and also examination the pipelines for any kind of leakages, as some might require firm.
    If you are mounting an electric shower, bear in mind to switch off the electricity supply before making any electric links. As soon as these links have actually been made (there must be support within the instruction manual), the power supply can be switched over back on.

    Readjusting Water Stress to Match Your Shower


    The cold water storage tank can be raised to a higher height (in some cases as little as 150mm (6inches)) by fitting a solid wood assistance underneath it - potentially composed of struts and blockboards. If you choose this alternative, the major as well as distribution pipes will certainly likewise have to be raised to meet the brand-new elevation of the tank.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it needs to be connected into the power supply in order to operate.

    Piping as well as Drainage


    It is best to use 15mm diameter supply pipes, and make the go to the shower as brief and also straight as feasible so as to preserve maximum pressure and also minimise heat loss. In addition, by reducing using elbows for pipeline corners, you can decrease the resistance in the circulation of the water system. You can accomplish this by bending the pipelines instead.

    Most Usual Errors


  • Breaking or overlooking neighborhood code limitations.

  • Using pipelines that are too tiny.

  • Connecting copper to galvanized without using a brass or dielectric suitable between both.

  • Not utilizing tape or pipe substance at threaded joints.

  • Not leveling your components when installing them.

  • Not installing an air space filling for components.

  • Cutting supply stub outs also short to install the shutoff valves onto after the completed wall remains in place.

  • Not effectively aligning tubes into installations or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will certainly trigger a leakage.).

  • When turning the water back on in your house, always run the outdoors hose pipe shutoff or flush your commodes to bleed dust and air from the lines. This particles can cause problems in your sink taps and other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Freestanding Shower Unit

    I hope you enjoyed our topic about How to Install a Freestand. Thanks a ton for taking a few minutes to read our posting. For those who appreciated our blog entry kindly be sure to pass it around. Thanks a bunch for your time. Visit again soon.




    Information Here


    Leave a Reply

    Your email address will not be published. Required fields are marked *